Lancaster CRO-325

Lancaster CRO-325

Lancaster Water Treatment Water Systems CRO-325 Reverse Osmosis Systems Compatible Replacement Water Filters And Reverse Osmosis RO Membranes
  1. Amtrol ® RO 4 RO Replacement Reverse Osmosis Water Accumulator Tank

    Regular Price: $79.99

    Special Price $59.99

    As low as: $49.99
    Amtrol ® RO 4 RO Replacement Tank for Reverse Osmosis Water Systems. 4.4 Gallon (15" high X 11" diameter - including base) SS Stainless Steel Connection Stem - Connection Size: 1/4" MNPT - Valve Optional Learn More
  2. GOES GREEN - REVERSE OSMOSIS Stainless Steel Water Storage Tank - 1000

    Regular Price: $149.99

    Special Price $99.99

    As low as: $85.99
    SS Stainless Steel Reverse Osmosis 4.4 Gallon Total Capacity Tank. This is one of the finest RO tanks we have ever seen. The patented O-ring seal on the air stem assures "set and forget" pressure settings. Keeping the pressure in the tank set correctly is an important factor in operating your RO system. Approximately 14" high (without the tank valve) X 11" in diameter. Learn More
  3. Air Pressure Gauge for Reverse Osmosis Water Accumulator Tanks -1000

    Regular Price: $24.99

    Special Price $17.99

    As low as: $12.99
    Air pressure gauge for reverse osmosis water accumulator tanks - Specially calibrated for reverse osmosis system tanks. Scale from 1 to 20 PSI. Large scale reading over small PSI range allows optimum accuracy. Just like car tires lose air pressure, so does the bladder of your reverse osmosis water accumulator tank. Improper tank air pressure will cause your system to operate improperly. This is a must for all reverse osmosis system owners. Learn More
  4. Leak Controller for Reverse Osmosis Systems, Water Coolers, Refrigerators, Ice Makers and Coffee Machines

    Regular Price: $79.99

    Special Price $49.99

    As low as: $44.99
    Save a flood inside the house. Prevent costly water damage. Automatically shut off the water to leaking Reverse Osmosis Systems, Water Coolers, Refrigerators, Ice Makers and Coffee Machines. Alarm flashes and beeps to notify you to the system shut down. Very simple to install and use. Brilliant design. Simply place the sensor (Similar in size to a small computer mouse) where water will collect below the system. Cut the incoming 1/4" water tube and insert each end into the easy to use John Guest quick connectors on the controller. When the sensor gets wet it shuts off the incoming water at the controller. Reset the sensor by wiping it dry. It even comes with a built in filter change reminder. Set it to beep and flash after 6, 12 or 18 months, when it is time for a filter change or scheduled maintenance. # LCS14 with 4 1/2' cord that connects the sensor. The Leak Controller is a great way to control costly leaks. Learn More